Umweltwissenschaften: Eine indische Zeitschrift
ISSN (PRINT):0974-7451

Abstrakt

Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions

Dayanand M.Goudar, G.B.Rudrakshi, G.Jagannatha Reddy, V.C.Srivastava, Jagdish Vagamode


AnAl–30Mg2Si- 2Cu alloy was produced by spray casting and the secondary processing such as hot compression and heat treatment were carried out. The coarsening behavior, distribution and size of the Mg2Si precipitates, the influence of subsequent heat treatment on the microstructure were investigated Uniform distribution of Mg2Si was achieved by spray casting. The hardness tests were conducted on spray deposited, secondary processed and heat treated alloys. The results indicate that spray casting has strong influence on microstructure and hardness of the material. The microstructural refinement of the alloy was enhanced during hot compression. The alloying with copper lead to further increase in strength by age hardening due to precipitation Al2Cu phase. A significant improvement in hardness was observed after hot compression and heat treatment.


Haftungsausschluss: Dieser Abstract wurde mit Hilfe von Künstlicher Intelligenz übersetzt und wurde noch nicht überprüft oder verifiziert

Indiziert in

  • CASS
  • Google Scholar
  • Öffnen Sie das J-Tor
  • Nationale Wissensinfrastruktur Chinas (CNKI)
  • CiteFactor
  • Kosmos IF
  • Verzeichnis der Indexierung von Forschungszeitschriften (DRJI)
  • Geheime Suchmaschinenlabore
  • Impact Factor für wissenschaftliche Artikel (SAJI)
  • ICMJE

Mehr sehen

Zeitschrift ISSN

H-Index der Zeitschrift

Flyer

Open-Access-Zeitschriften